Buzzer Variation using Potentiometer | Build and play Fastest finger first game with breadboard | Controlling LED and buzzer with single push button | Control LEDs in sequence using input from PIR sensor | Ultrasonic based LED control | Displaying scrolling messages on the LCD | Display Object Distance | Pattern controlled robot | Obstacle locating robot using IR | Obstacle detection using ultrasonic sensor by displaying its distance | Telepresence robot | Line follower robot |
S.No. | Part Name | Quantity |
---|---|---|
1 | Breadboard | 1 |
2 | Arduino UNO | 1 |
3 | Light Emitting Diode (LED)s | 10 |
4 | Buzzer | 2 |
5 | IR Sensor Module | 2 |
6 | PIR Motion sensor | 1 |
7 | LDR sensor module | 2 |
8 | L293D Module | 1 |
9 | Servo Motor | 1 |
10 | Relay Module | 1 |
11 | 9v Battery | 2 |
12 | Jumper wires | 20 |
13 | Chassis and its parts | 1 |
14 | Transistor BC547 | 1 |
15 | Push Button | 2 |
16 | Copper wire 18 gauge | 1 |
17 | AAA battery | 1 |
18 | Neodymium magnets | 6 |
19 | SPST toggle switch | 1 |
20 | Double sided tape | 1 |
21 | Ultrasonic Sensor Module | 1 |
22 | Liquid Crystal Display | 1 |
23 | Potentiometer (5k ohm) | 1 |
24 | Stepper motor | 1 |
25 | 7805 IC | 1 |
26 | 1000 uF@250V capacitor | 2 |
28 | Capacitor(470uF) | 2 |
29 | IC 4081 | 1 |
30 | Resistor Box | 1 |