5v Power supply circuit using regulator IC | Buzzer ON/OFF using push button | Alarm tone using switch and Potentiometer | Blinking of LED for 2 seconds by detecting 5 IR signal | Controlling servo motors based on input from IR sensor | Make a display system using LCD and stepper motor | Blinking of LED by measuring some distance | LDR based Relay ON/OFF | Display messages on LCD in different patterns | Autonomous Bot | Line follower robot | Maze solver |
S.No. | Part Name | Quantity |
---|---|---|
1 | Breadboard | 1 |
2 | Arduino UNO | 1 |
3 | Light Emitting Diode (LED)s | 10 |
4 | Buzzer | 2 |
5 | IR Sensor Module | 2 |
6 | PIR Motion sensor | 1 |
7 | LDR sensor module | 2 |
8 | L293D Module | 1 |
9 | Servo Motor | 1 |
10 | Relay Module | 1 |
11 | 9v Battery | 2 |
12 | Jumper wires | 20 |
13 | Chassis and its parts | 1 |
14 | Transistor BC547 | 1 |
15 | Push Button | 2 |
16 | Copper wire 18 gauge | 1 |
17 | AAA battery | 1 |
18 | Neodymium magnets | 6 |
19 | SPST toggle switch | 1 |
20 | Double sided tape | 1 |
21 | Ultrasonic Sensor Module | 1 |
22 | Liquid Crystal Display | 1 |
23 | Potentiometer (5k ohm) | 1 |
24 | Stepper motor | 1 |
25 | 7805 IC | 1 |
26 | 1000 uF@250V capacitor | 2 |
28 | Capacitor(470uF) | 2 |
29 | IC 4081 | 1 |
30 | Resistor Box | 1 |
31 | DC motor-12V 150 RPM | 2 |
32 | IC 555 | 1 |
33 | Keypad | 1 |